DAEWO STAPPLER D30S3 PUMPE 26313RAA, 26313-RAA, ACNER13ABA048AZBAA00CD0A
TOP
-10%
| CODE TITLE | SERIES 26 GEAR PUMP (SINGLE UNIT) |
| UNIT TYPE | LOAD SENSING FLOW DIVIDER w/ OR w/o RELIEF VALVE(see positions 16,17) |
| INPUT ROTATION | RIGHT-HAND ROTATION CW |
| DISPLACEMENT | 30.6 cm3/r [1.87 in3/r] |
| INPUT SHAFT | 11 TOOTH 16/32 SPLINE, MIN FULL SPLINE 22.4 [.88], SHAFT EXT 31.8 [1.25] |
| MOUNTING S (FRONT) | (2-BOLT A) SAE FLANGE SERIES 82-2 |
| AUXILIARY MOUNTING S (REAR) | NO REAR MOUNTING |
| PORTS SIZES & LOCATIONS-BACKPLATE | FLO DIV LOAD SENSING, SUCTION PORT 1.3125-12 UN-2B SAE O-RING PORT; PRIMARY PRESSURE PORT .750-16 UNF-2B SAE O-RING PORT; SECONDARY PRESSURE PORT .875-14 UNF-2B SAE O-RING PORT; LOAD SENSING PORT .4375-20 UNF-2B SAE O-RING PORT - SIDE PORTS |
| PRIORITY FLOW DIVIDER SETTING | LOAD SENSING - DYNAMIC SIGNAL - BIAS PRESSURE 7.6 bar[110 lbf/in2] |
| RELIEF VALVE FULL FLOW SETTING | 82.8 bar [1200 lbf/in2] LOAD SENSING |
| TEST DATA | UNIT SPECIFIC |
| SPECIAL S | NO SPECIAL S |
| IDENTIFICATION | STANDARD |
| DESIGN CODE | A |
